Monday, March 3, 2014

Crafty Project: Linoleum Block-Printed Geometric Onesie

The babies are coming--so many babies! Last week, we were given a few onesies that we were to decorate for a friend's brand new baby! He was coming soon (about two days after the shower!) so we needed a quick decor option and not a lot of fuss: linoleum blocks it is! We did a full tutorial on linoleum block printing last year, so definitely refer to those instructions if you are starting from scratch.



You will need:
• a linoleum block
• several onesies (in case you mess up)
• an ink brayer
• fabric ink (I used my old gocco fabric ink)
• a surface to pull ink--I used an acrylic sheet
• a pencil
• linoleum cutter
• not pictured--an iron and several sheets of paper to iron over


First, draw your design onto your linoleum block. It doesn't matter if you mess up (see my weird floating triangle in there?) the cutting is what really matters.


When you have your design exactly how you want it, use a "small V" cutting attachment to go around your design lines. Once you've cut your lines, use a larger "U" to dig out the areas that you do not want to stamp. I even used the knife portion of the cutting tool to remove full areas that I did not need, which is up to you!


After you are finished carving your stamp, pull some of the ink with the brayer until it is evenly spread onto the roller. Lightly roll over your stamp (or if you are using an ink pad, pat the stamp against the pad) in order to see any mistakes you might need to remove on the stamp.


After you're finished making sure your stamp is cut perfectly, stamp a few times on a sheet of paper or a loose piece of fabric to test. If the impression is to your liking, prepare your onesie by placing a thick piece of card stock or an acrylic sheet (as shown here) inside the onesie to protect the back from getting ink on it.



(I also taped the sleeves and sides to the table in order to avoid any wrinkling.)



When you're ready to stamp, pull a thin layer of ink over your stamp and press it to your surface. Create your design and allow the fabric to dry. Once the impressions are dry, remove your acrylic sheet (if you used paper, you may leave it in there), and cover the design with a sheet of paper. Iron on high heat for about one minute to set the design.


Now you're all finished! Wrap that gift up (a onesie with a funsie for big sis) with some baker's twine and you're all set! Thanks to Madi and Sarah for the onesies and lovely shower to Jaqui (and baby Enzo).




Blogging tips